Firearm Accessories
Refine by
GroveTec Magazine Cap 1" Swivel Set 20 Gauge (Remington 870, 870 Youth & 1100)
GroveTec Magazine Cap 1" Swivel Set 20 Gauge (Remington 870, 870 Youth & 1100)
The GrovTec Sling Swivel Set includes mag cap replacement with swivel stud, 3/4" wood screw rear swivel stud and one pair of GT locking swivels.
SKU GTSW87
C $64.99
Thompson Center Super Lube All-Purpose Anti-Seize Lubricant 1/2 oz Tube
Thompson Center Super Lube All-Purpose Anti-Seize Lubricant 1/2 oz Tube
Hard-working synthetic lubricant protects the threads of muzzleloading breech plugs as well as shotgun choke tubes. Withstands high operating temperatures and prevents fouling or powder residue from binding the parts.
SKU 31007362
C $14.99
Grovtec Push Button Magazine Cap Swival Set (12 Ga Reminton 870, 1100)
Grovtec Push Button Magazine Cap Swival Set (12 Ga Reminton 870, 1100)
Standard mag cap replaces factory cap and allows the use of any GrovTec push button swivel or even the multi-adaptor for speed and versatility in the field. Each set includes one 12 gauge mag cap and one standard 1" loop push button swivel.
SKU GTSW297
C $59.99
CVA Blackhorn QR Breech Plug
CVA Blackhorn QR Breech Plug
QRBP is short for quick removable breech plug. Once fitted to the barrel of the rifle (requires a special fitting tool that is provided), no tools are required to install or remove it, making take down for cleaning a snap.
SKU AC1610BH
C $59.99
Caldwell XLA Bipod 6"-9" M-Lok/Keymod
Caldwell XLA Bipod 6"-9" M-Lok/Keymod
Introducing the lowest profile bipod mount available. The Caldwell M-LOK/KEYMOD 6”-9” XLA Bipod is lightweight, sturdy and ready for all situations.
SKU 1081950
C $84.99
On Sale
Carlson's Auto Catcher for Semi-Auto Shotguns 12 & 20 Gauge
Carlson's Auto Catcher for Semi-Auto Shotguns 12 & 20 Gauge
The Carlson's Auto Catcher Shell Catcher for Semi Auto Shotguns features an all-steel design, preventing empty hulls from being ejected. The shell catcher retains them for you for easy removal. This model fits most semi-auto 12 and 20 gauge shotguns.
SKU 00440
was C $24.99
Save 15%
C $21.24
Sig Sauer Romeo 1 Handgun Mounting Kit (Glock MOS)
Sig Sauer Romeo 1 Handgun Mounting Kit (Glock MOS)
SKU SIGPSOR1MK011
C $69.99
Traditions Revolver Nipple Wrench
Traditions Revolver Nipple Wrench
Fits all 1851, 1860 and 1858 revolvers. Nipple pick attached to brass cap.
SKU A1260
C $14.99
Magpul MBUS3 Rear Sight (Fits M1913 Picatinny Rails)
Magpul MBUS3 Rear Sight (Fits M1913 Picatinny Rails)
Significantly reduced in size from the MBUS, this sight sits at just 0.55” high when folded, 1.38” at its widest point, and weighs a scant 30 grams with hardware.
SKU MAG1167-BLK
C $89.99
Magpul MBUS3 Front Sight (Fits M1913 Picatinny Rails)
Magpul MBUS3 Front Sight (Fits M1913 Picatinny Rails)
Significantly reduced in size from the MBUS, this sight sits at just 0.47” high when folded, 1.38” at its widest point, and weighs a scant 25 grams with hardware.
SKU MAG1166-BLK
C $59.99
Traditions Musket Thunder Nipple M8 Metric Thread
Traditions Musket Thunder Nipple M8 Metric Thread
Magnum Musket Nipple for use with musket caps. The Thunder Nipple uses an 8mm thread that tapers at the end to lock into the Thunder Dome Breech Plug. This magnum ignition system assures you a torch-like flame to ignite the powder.
SKU A1408
C $14.99
Benelli Lupo Muzzle Brake 5/8"
Benelli Lupo Muzzle Brake 5/8"
This muzzle brake was designed for the Benelli LUPO with a barrel thread pitch of 5/8″.
SKU 80350
C $149.99
Blackhawk Tactical Coiled Pistol Lanyard
Blackhawk Tactical Coiled Pistol Lanyard
This pistol keeper gives an extra level of security, while still allowing full extension for tactical situations. Made with coiled wire and black rubber external laminate.
SKU 90TPL1BK
C $39.99
Canuck Sling Swivel Set for Lever Action
Canuck Sling Swivel Set for Lever Action
Swivel Lock is a spring loaded plunger and a knurled, threaded sleeve that locks down to completely eliminate accidental opening of the swivel.
SKU CAHA1
C $24.99
Hunter's Specialties Butt Stock Rifle Shell Holder w/ Pouch
Hunter's Specialties Butt Stock Rifle Shell Holder w/ Pouch
Made of heavy-duty polyester, this convenient rifle shell holder has adjustable Velcro straps to secure it to the butt stock of your rifle. Its suede cheek piece adds comfort and protects the stock of the gun.
SKU 01620
C $14.99
On Sale
Ruger Precision Hybrid Muzzle Brake & Lock Nut
Ruger Precision Hybrid Muzzle Brake & Lock Nut
Reduces recoil by as much as 58% and improves accuracy. The brake locks into position using external jam nut. This muzzle break installs quickly using a 7/8″ box wrench or crescent wrench, and is manufactured from alloy steel with a matte black finish.
SKU 24418_sku
was C $149.99
Save 15%
C $127.49
Caldwell XLA Bipod 9"-13" Fixed
Caldwell XLA Bipod 9"-13" Fixed
The Caldwell XLA Bipod provide a stable shooting support that conveniently attaches to almost any firearm with a sling swivel stud.
SKU 403215
C $59.99
Traditions .50/.54 Caliber Supreme Loading Jag
Traditions .50/.54 Caliber Supreme Loading Jag
The Traditions Supreme Loading Jag is designed to load polymer tip, lead tip and hollow point bullets without damaging the tips. For .50/.54 cal.
SKU A1770
C $14.99
TruGlo Tac-Pod Carbon Pro Rail Mount 6-9"
TruGlo Tac-Pod Carbon Pro Rail Mount 6-9"
With full pan, tilt, and level control and lightweight carbon-fiber legs, the TAC•POD Carbon Pro is great on tactical or hunting rifles. The 6-9 in. leg length is ideal for most bolt action rifles and average sized shooters.
SKU TG8903S
C $99.99
Browning Recoil Hawg Matte Black, multi caliber design, fits most rifle barrels .30 caliber and smaller with a5/8"-24TPI or 1/2"-28 TPI threaded muzzle. Barrel shoulder must at least .700" to install.
Browning Recoil Hawg Matte Black, multi caliber design, fits most rifle barrels .30 caliber and smaller with a5/8"-24TPI or 1/2"-28 TPI threaded muzzle. Barrel shoulder must at least .700" to install.
Multi-caliber design. Fits most rifle barrels .30 caliber and smaller with a 5/8"-24TPI or 1/2"-28 TPI threaded muzzle. Barrel shoulder must be at least .700" to install.
SKU 1293082
C $179.99
Franchi Momentum Muzzle Brake 5/8"
Franchi Momentum Muzzle Brake 5/8"
This muzzle brake was designed for the Franchi Momentum with a barrel thread pitch of 5/8"x24TPI and is suitable for .30 cal and under.
SKU F0468900
C $119.99
Wheeler Engineering Professional Laser Bore Sighter Red Laser
Wheeler Engineering Professional Laser Bore Sighter Red Laser
High power daylight visible red laser and a high-strength magnetic connection to the barrel to deliver fast accurate bore sighting. This system works with virtually all firearms.
SKU 580022
C $199.99
On Sale
Ruger MK III & MK IV 22/45 Picatinny Rail
Ruger MK III & MK IV 22/45 Picatinny Rail
Rail fits firearms with factory pre-drilled receivers. Includes three screws.
SKU 90623
was C $24.99
Save 15%
C $21.24
Hornady Bore Driver FTX 50 Cal 290 Grain Four 5-Pack Speed Loaders (20 Count)
Hornady Bore Driver FTX 50 Cal 290 Grain Four 5-Pack Speed Loaders (20 Count)
The Bore Driver FTX bullet incorporates an InterLock ring that helps retain bullet weight upon target impact that when coupled with a strengthened copper-alloy jacket delivers maximum penetration and expansion for the ultimate big-game performance.
SKU 67713
C $39.99
Traditions 209 Brass Capper/Decapper
Traditions 209 Brass Capper/Decapper
Traditions #209 Brass Primer Capper for Muzzleloaders holds twelve #209 primers. Just squeeze the lanyard loop to remove from body, load primers and replace lanyard loop.
SKU A1418
C $29.99
On Sale
Ruger PC9 Carbine Magazine Well Insert Assembly (Ruger American Pistol Magazines)
Ruger PC9 Carbine Magazine Well Insert Assembly (Ruger American Pistol Magazines)
This Magazine Well Insert Assembly is designed to work exclusively with the Ruger PC Carbine. It accepts all Ruger American Pistol 9mm magazines (90510, 90514, 90617 and 90618). The flush-fit design is made from rugged, glass-filled polymer material for strength and durability.
SKU 90655
was C $39.99
Save 15%
C $33.99
On Sale
Umarex 88G Co2 Cylinder Removable Adaptor
Umarex 88G Co2 Cylinder Removable Adaptor
This Umarex 88 gram Co2 Saver Adapter means no more wasted Co2 because it allows for the removal of a partially-full 88/90 gram cartridge thanks to a special valve on the adapter that automatically closes when not in an airgun.
SKU 2211132
was C $39.99
Save 15%
C $33.99
On Sale
Ruger PC Carbine Magazine Well Insert Assembly for 9mm Glock
Ruger PC Carbine Magazine Well Insert Assembly for 9mm Glock
Designed to work exclusively with the Ruger PC Carbine. It accepts all Glock 9mm magazines. The flush-fit design is made from rugged, glass-filled polymer material for strength and durability.
SKU 90654
was C $39.99
Save 15%
C $33.99
Birchwood Casey T&S Save-It Shell Catcher For 12 Gauge Beretta A400 Right Hand
Birchwood Casey T&S Save-It Shell Catcher For 12 Gauge Beretta A400 Right Hand
The T&S Shell Catcher catches single shotgun empties and allows you to save them for reloading. They prevent empty shell from being thrown towards the next shooter and stops empty hulls in the ejection port at an angle that allows for easy removal.
SKU 41024
C $29.99
On Sale
Ruger 57 Optic Adapter Plate for Burris & Vortex Sights
Ruger 57 Optic Adapter Plate for Burris & Vortex Sights
This Optic Adapter Plate supports the use of Burris FastFire and Vortex Viper/Venom red dot sights on the Ruger-57 pistol. The plate is precision CNC machined from 6061-T6 aircraft aluminum with a matte black hardcoat finish for strength and durability.
SKU 90720
was C $64.99
Save 15%
C $55.24
Pachmayr Recoil Pad Deluxe Field 325 Black
Pachmayr Recoil Pad Deluxe Field 325 Black
Medium, deluxe field recoil pad (5.40"Hx1.90"W). 1.10" thick. 3.10" hole. Rounded for quick mounting. Non-slip, stippled surface. Grind to fit. Gunsmith installation recommended.
SKU 00006
C $39.99
Streamlight Vertical Grip w/ Side Rail
Streamlight Vertical Grip w/ Side Rail
Integrated Picatinny rail. Storage compartment in grip. Includes installation tool. Machined aluminum. Hard anodized rail grabber.
SKU 69114
C $114.99
Tikka CTR Muzzle Brake Blued 5/8-24 Thread
Tikka CTR Muzzle Brake Blued 5/8-24 Thread
The Sako/Tikka Tactical Conical Muzzle Brake is designed for .30 caliber or smaller bore rifles from Sako and Tikka. The muzzle brake can be affixed to rifle barrels that feature 5/8-24 threading and helps eliminate recoil, muzzle rise, and flash. The asymmetrical design reduces dirt and dust kick-up when firing from the prone position.
SKU S54065100
C $149.99
IMI TLM1 Tactical Side Flashlight Mount Black
IMI TLM1 Tactical Side Flashlight Mount Black
This IMI Defense quick detach 0.75” and 1” Light Mount TLM is a lightweight construction and gives a secure and stable platform to mount flashlights. Made of high quality fiber reinforced polymer compound material to stand up to the rigors of duty.
SKU TLM1B
C $38.99
Caldwell Bipod Adapter for Picatinny Rail
Caldwell Bipod Adapter for Picatinny Rail
The Bi-pod adaptor quickly and easily attaches to a picatinny rail. Any standard bipod or sling can then be attached to the integrated swivel stud. A curved "fore-end style" profile assures the perfect fit for the bipod to mate with.
SKU 535423
C $24.99
Birchwood Casey Save-It Shell Catcher Left Hand
Birchwood Casey Save-It Shell Catcher Left Hand
Works on all 12 gauge semi-auto shotguns and prevents the empty hull from being ejected and landing on the ground.
SKU 41013
C $19.99
The Shooters Box 20 Gauge Rifled Bore Adaptor
The Shooters Box 20 Gauge Rifled Bore Adaptor
This adapter gives your 12 gauge single or double shot break open shotgun the ability to fire a 9mm bullet (standard 9mm Luger - 9x19). Precision machined from high quality stainless steel to the OD specifications of a 2-3/4 20ga shell plus.
SKU 31517
C $34.99
The Shooters Box 12 Gauge Rifled Bore Adapter
The Shooters Box 12 Gauge Rifled Bore Adapter
This adapter gives your 12 gauge single or double shot break open shotgun the ability to fire a 22LR bullet. This adapter is precision machined from high quality stainless steel to the OD specifications of a 2-3/4 12ga shell.
SKU 31357
C $34.99
The Shooter Box 12 Gauge Smooth Bore Adaptor
The Shooter Box 12 Gauge Smooth Bore Adaptor
This adapter gives your 12 gauge single or double shot break open shotgun the ability to fire a 22LR bullet. Precision machined from high quality stainless steel to the OD specifications of a 2-3/4 12ga shell.
SKU 31630
C $29.99